Overclock.net - Overclocking.net - View Single Post - The Socket 939 Appreciation Club and Knowledgebase [Official]

Ultrasonic2 (muffy) · 03-18-08

here is my 4600+ at 3000.. i had to run it at 1.6v to achieve this overclock. I had to do a volt mod on the MBM to get the 1.6 volts.. When i cranked up my CPU to 1.6 volts my original 450 watt PSU caught on fire !
I't stable as, and i run it like this all the time .. obviously it's water cooled

Please add me to the list

03-18-08	#1130 (permalink)
Ultrasonic2 (muffy) Extreme Cooler Join Date: Jun 2007 Location: Auckland New Zealand Posts: 1,032 Rep: 75 Unique Rep: 49 Trader Rating: 0	here is my 4600+ at 3000.. i had to run it at 1.6v to achieve this overclock. I had to do a volt mod on the MBM to get the 1.6 volts.. When i cranked up my CPU to 1.6 volts my original 450 watt PSU caught on fire ! I't stable as, and i run it like this all the time .. obviously it's water cooled Please add me to the list Attached Thumbnails __________________ TEC Calculator Quad TEC Water Chiller TEC Chiller Cold Side Pumps: MCP355 pumps in series RES: Swiftch micro res Water Block:D-tek FuZion CPU 6.5mm & washer TEC Water Chiller. Quad 226 TECs wired in 2 series pairs PSU: 2x 24volt 350watt meanwells TEC Chiller Hot Side Radiators: 3x 240SGTS radiators in parallel to each other Fans: 6x Scythe ULTRA KAZE 120 x 38 mm fans sucking though a 7cm shroud Pumps: 2x MCP655 pumps in series RES: 80x400mm Water Block: Swiftech MCW60 GPU Controller: M-Cubed T-balancer BigNG adjusts fan speeds and TEC voltage to keep my system at X temp