Shots of the PSu mount I made out of a PCI cover. I'll get pics up later of the disk drives when I get some double sided tape on them.
Before. As you can see without much metal left on the psu, it sags under its own weight.
An old PCI cover has a pre-bent 90degree angle on it, and it was just perfect for what I needed. Quick solution rather than me cutting and bending a piece like I originally planned.
Hole drilled.
Mounted up
Looking in from the top drive bay
After. Much better, much better!
Edit: Adding drive pics.
Got the double sided tape on, needed 3 layers. Looks the same for the top dvd/cd-rw drive as well.
That tape on the button, just hit the bottom corner and-
Viola!
CPU
e6750,lapped @ 3.8ghz (475x8) |
Motherboard
Gigabyte EP45-UD3R |
Memory
2x 2GB G.Skill-1066mhz |
Graphics Card
XFX 260-216 Core Edition - 24/7 folder |
Hard Drive
300gb SATA Maxtor |
Sound Card
onboard |
Power Supply
Corsair TX750w |
Case
Antec 300 + cable management |
CPU cooling
Xiggy S1283 Lapped+bolt kit/Extreme Spirit 2 on NB |
GPU cooling
Accelero Xtreme GTX 280 |
OS
Windows 7 |
Monitor
19" Samsung 932bw |