Thread: Case Rebirth: [Complete] Jessie's Gumdrop
View Single Post
Old 05-25-08   #40 (permalink)
CattleRustler
between projects
 
CattleRustler's Avatar
 
intel nvidia

Join Date: Apr 2008
Location: NYC (Queens)
Posts: 7,217

Rep: 660 CattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famous
Unique Rep: 377
Trader Rating: 0
Default

Jessie's Gumdrop - Day 03

Today was a late start, and a bit of an ass-dragger so I didnt get too much done. I walked over to the HW store to find that they were closed So I decided to make due with what I had which was basically a mouse sander and a couple of 240 grit pads. First I prepared to scuff up the beige painted parts... (chasis top)

(back panel)

thats my "boat motor" thing that I use to blow off dust. Actually its an air pump to inflate an air-matress. Works a charm to dedust (pun) pc's and etc.

then I went to town on the innards

after some scuffing with 240. Did I go crazy? Anyway I still need to get in there with hands when I get some proper sand paper. Yes I will be using etching primer

I decided to mark off some tentative plans for the case window cut, while sipping a few beers and listening to Stone Temple Pilots...



ok I was bored...



Well that was it for today. Thanks for reading. More updates soon



* This Worklog post was generated using WorklogCreator - Version: 1.0.0.5
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip
__________________
YO DAWG I HERD YOU LIKE CASE MODDING SO WE PUT A CASE IN YO CASE SO YOU CAN MOD WHILE U MOD

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7
visually build postable worklogs, quickly & easily with drag and drop

MOTM's: 6/08 2nd Place 12/08 1st Place 2/09 1st Place 8/09 1st Place

System: Chuckle2Tits
CPU
Core i7 920 2.66 45nm D0
Motherboard
Foxconn BloodRage x58
Memory
6 GB Corsair Dom. DDR3 1600
Graphics Card
EVGA GTX 285
Hard Drive
1x500 GB WD Caviar SATAII
Sound Card
Creative X-Fi Xtreme Gamer
Power Supply
Silverstone Decathalon 850
Case
PolymorphiX Prototype v1
CPU cooling
CM Gemini II s (Megahalem pending)
GPU cooling
stock nvidia
OS
Win 7 RC 64
Monitor
Viewsonic VX2255 22" LCD
Overclock.net Mod of the Month

Last edited by CattleRustler : 05-27-08 at 06:58 PM
CattleRustler is offline Overclocked Account   Reply With Quote
 
Page generated in 0.04371 seconds with 7 queries