CattleRustler

day 12 continued

peeled tape backers and pressed it on, here's the result

back shot showing black speed screws on case

lamp and inverter in their final positions, used 3m tape to mount



















If im gonna do acrylic Im gonna do it right, hit lowes this morning

got some cement and 12 11.5 tpi spirals, and 12 46 tpi spirals. might as well have this stuff on hand. I plan to use the 11.5 tpi and low stroke rate to cut acrylic, but I will test on scrap first (thats tomr)

had to assemble stand








this is where the wife stopped me
more tomr after work

* This Worklog post was generated using WorklogCreator - Version: 1.0.0.5
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop