CattleRustler

The Intelligence - Day 07

Well, I guess it was time to poop or get off the pot, as they say. Let the mobo back-cuts commence...





then I flipped it over and finished the cuts from the outside of the case, and viola!

almost looks like it was meant to be there





purty



level and flush re-checks

I had to drill out 6 holes to allow the lian li standoffs poke thru down thru the rails. I tested a 4-40 tap but the lian li stand offs are some odd size because they dont fit 4-40 or 6-32, and 8-32 is too big, so I drilled 1/8" holes to let the standoffs poke thru and not hit

test fitted, all ok

didnt have a 60mm fan template so I made one real quick

marked off for 4 fans in the upper back right portion of the case (exhaust).

At that point dinner was ready so I packed it in for the day. Just as I was closing my garage door this cloud moved in and did this cool silhouette shadow thing so I snapped a pic


Still lots to do yet but up next will be fan hole cuts, and upper case cuts for back area over pci slots.

Thanks for watching

* This Worklog post was generated using WorklogCreator - Version: 1.0.0.6
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop