The Intelligence - Day 10.5 - mini update
Heres a small, rare, weeknight update...
Those are the two small psu spacer pieces I bonded last night, and the psu support rail I bonded this morning as I was leaving for work
time to bond the psu brackets to the case, got out the JBWeld supplies
thats the parts test-fitted before applying the jbweld
mixed a small batch, slathered it on the bottoms of the l brackets, and lined them up in their new permanent home
set that stuff aside to cure overnight, in the meantime, what have we here?
?
small glass bottles with brush caps!!!
WoooooHoooo :do dance:
sorry, anyway I have been in desparate need of these things, to keep both types of tap fluid in, within arms reach. Prior I have been cutting down plastic cups and using qtips to apply - than having to dispose of that stuff when I was done since that stuff (tap fluid) is nasty and poisonous, so these little gems will be perfect - no fuss no waste
decided to TEST my hand at cutting some circles of mesh for the fan openings
the good news it cuts like butter, the bad news I didnt do so well at it :/
I have a couple of ideas of how to do this better using a 2.5" hole saw without a pilot bit (in a 2 ply wood jig that I will make) the hope is the interior circle of mesh left by the 2.5 OD hole saw will yield a perfect circle very close to the 2.25 diameter I need. If not, then I will try something else
thanks for watching
* This Worklog post was generated using WorklogCreator - Version: 1.0.0.6
* Free Download:
http://www.mod2software.com/worklogc...logcreator.zip