Add me to the list! Slightly Modded (took out the plastic stuff behind the mesh, replaced the Power LED with an Orange LED.)
7x120mm, 1x92mm, 1x80mm.
The 92 is in the back of my expansion bays, and the 80 was taped to the back of my power supply because the supplied fan is useless. Yes, my CPU cooler is running passive. Since I took those photo's I've fixed up some of the wires, hiding most of the ones you can see in the pic.
Also, I'm running an external CMOS reset, which is just a fan extension cable with a broken tab on the female end. I put the fan cable over the CMOS reset pins, and routed it around my rear fan and down out the top gasket.
__________________
CPU
Q9550 @ 4.25 |
Motherboard
EP45-UD3P |
Memory
4Gb G.SKILL F2-8800 |
Graphics Card
4890 |
Hard Drive
RAID0 CavBlk640GB |
Sound Card
Prelude |
Power Supply
TruePower 650w |
Case
CM690 |
CPU cooling
HDT-S1283 |
GPU cooling
Accelero S1 |
OS
W7 Pro x64 |
Monitor
W2052TQ |
Last edited by Murderous Moppet : 07-31-08 at 12:32 AM
|