The Intelligence - Day 14
got the lappy dvd/cd drive and converter - som***** is tiny
Back to that in a few
needed to add the psu exhaust to the back of the case, pilotted...
omg, what a massive undertaking it is to drill a hole
...
blam!
while I rolled all sorts of ideas around in my silly head, I mindlessly began filing and sanding the case hardware. One latch sanded, the other one was on deck.
decided to mess with the slot drive mounts, needed little tiny holes. the screws are ridiculously small, like smaller than m3 or 4-40, I need to order more screws for the drive from the mcmaster, but anyway, drilled out a bracket
started aligning it using complex math etc
then i just drew a line
and began cutting
finished the rough cut on the slot.
the drive will find the slot later, instead of the other way around
tomorrow I will line the drive to the slot and jbweld the brackets - among 900 other things
thanks for watching
* This Worklog post was generated using WorklogCreator - Version: 1.0.0.6
* Free Download:
http://www.mod2software.com/worklogc...logcreator.zip