The Intelligence - Day 20
Spent a better part of the day sanding the other half of the case
here's a couple perspective shots since I havent really posted any lately...
quick detour to an idea I had. requires extracting a part from an old dead psu
what if I mounted that part in the back of my case, so the power cable was easily detachable, but on the inside (since the case psu is fully internal) I cut another power cord, leaving the three pin female part in tact, and soldering the bare wires to the connectors on this piece? Sort of like an extension? Any electrical types wanna send me in the right direction?
anyway, back to the case, wanted to do some spot priming to find pinholes or missed damage around the fan cutouts
few nicks here
this spot is clean. originally a screw hole iirc
this need s touch up too
and this
and this (sigh)
ok here around the dvd slot
applied some small dabs of Evercoat on all the areas pic'd above
I guess its more sanding tomr (yay)
moar work coming
thanks for watching
* This Worklog post was generated using WorklogCreator - Version: 1.0.0.6
* Free Download:
http://www.mod2software.com/worklogc...logcreator.zip