View Single Post
Old 09-10-08   #4 (permalink)
captthunderpnts
Networking Nut
 
captthunderpnts's Avatar
 
intel ati

Join Date: Aug 2007
Location: Delran, NJ
Posts: 970

Rep: 129 captthunderpnts is acknowledged by manycaptthunderpnts is acknowledged by many
Unique Rep: 113
Default

Vdroop is when your CPU voltage goes lower than the set value due to stress and passing through MOSFETS. Another example if that is: say you are listening to music in your car. You have a really nice system with aftermarket head unit, subwoofer, and two amps to cover all 5 (or however many you have) speakers. With the volume turned up (inducing stress), your lights blink to the music because you haven't enough amperage to supply to everything. See that due to stress on the electrical system, your 13.8v-14.4v current is being momentarily dipped down to say 11.6v.

Virtually all PCs are succeptible to vdroop. A good way to really check it out is note your BIOS voltage settings. Boot the computer up and open up CPU-Z and look at the voltage value. Because no system is perfect, I can guarantee that you will have at least some vdroop present.

There are ways to combat the symptoms, such as overvolting, or another just as popular remedy, the pencil mod. Basically you are lowering resistance in a given adjacent MOSFET, or the like, to compensate for the loss in voltage at load.
__________________
System: Almost Respectable...
CPU
E8400 @ 4.11ghz
Motherboard
DFI DK X38-T2R
Memory
G.Skill 2x2GB PQ 1000mhz
Graphics Card
Diamond HD 4870x2
Hard Drive
Seagate 500gb+WD 500gb+Hitach 1TB
Sound Card
X-FI XtremeGamer Fatal1ty
Power Supply
Corsair TX750W
Case
Antec 300
CPU cooling
Thermalright Ultra-120 Extreme
OS
Windows 7 Ultimate x64
Monitor
Acer P244W
captthunderpnts is offline   Reply With Quote
 
Page generated in 0.04808 seconds with 7 queries