Day 3
hey guys! more parts are in!
this is a G1/4" female to female transfer. this will go with the G1/4" male to male and a barb to extend the barb.
stop plugs. low profile and regular. depending on what i need, i'll use whichever one
male and female molex pins. and male and female molex connectors. for the psu extensions.
another psu extension. this one will be controlled by a switch, and the other will be on whenever the computer is on.
sound card. xonar dx. i've heard really good things about this sound card. can'nt wait to try it out.
fans.. an orange blackfire for the top part of the case. and two 80mm black fires for the psu.
and the best part! my case is here!!! i didn't take any pics of it before i started taking it apart cause i was just so excited to have it!
so here it is pretty much all stripped from the front. i still need to take out lots of rivets. because the exterior will be powder coated a midnightblue and the inside components will be powdercoated white.
another shot of the case from the side.
here are its side panels. that i'll need to cut up for a window and the radgrills on the bottom
here are the accessories that i took out. start from the top in counter clockwise fashion: HD cages, wheels, cpu exhaust, vga exhaust, psu base, bay panels, pci brackets, io panel, and the bottom center divider.
here are my rads refitted with the 45 degree rotary angles with the fatboy barbs.
here is a mock fitting of the rads at the bottom. a perfect fit! makes me happy!
and even better! still got clearance for the fans!
and another mock fitting but of the exhaust fans that will go below the case.
and here is the big question!!!
which style? please don't mind the off centeredness of the feet.
this one.
or this one?
thanks again guys for the feedback! always love to hear your opinions!
edit: forgot to put up the mock setup of the psu extensions and the powersupply.
* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download:
http://www.mod2software.com/worklogc...logcreator.zip