Thread: Scratch: [Completed] The Intelligence
View Single Post
Old 09-14-08   #842 (permalink)
CattleRustler
between projects
 
CattleRustler's Avatar
 
intel nvidia

Join Date: Apr 2008
Location: NYC (Queens)
Posts: 7,209

Rep: 660 CattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famousCattleRustler is becoming famous
Unique Rep: 377
Trader Rating: 0
Default

The Intelligence - Day 31

needed a few things from the hw store, more primer, a small clamp (they only had one the last time, and I wanted two), and some hose clamps Wow, hot and humid today out of the blue. I thought we were done with this crappy weather already. Oh well, fall is coming

started priming the bottom half of the case, thats one coat

4 coats inside and out along the sides. I then let it sit for an hour so I could flip it
It formed some nasty "fuzzies" on the inside which I think are related to the "rubbery grit" I felt yesterday when I was about to prime it. Its gonna need some light sanding and possibly another coat or two of prime, at least on the inside

since I had some time to kill while the primer dried, I took a stroll across the street and picked up a cool refreshing drink. was also doing some laundry simultaneously during this work session

threw 4 coats of primer on the center hinge top (forgot to snap pic after )

after the first primer session was dry I flipped the case and primed the top of it and blended down the sides a couple of coats

boo-ya
a few fuzzies formed on this side as well but not nearly as bad as the inside

on a cooler day I will give it a light sanding and see if it needs more prime, or if its in the bag for paint

thanks for watching



* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip
__________________
YO DAWG I HERD YOU LIKE CASE MODDING SO WE PUT A CASE IN YO CASE SO YOU CAN MOD WHILE U MOD

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7
visually build postable worklogs, quickly & easily with drag and drop

MOTM's: 6/08 2nd Place 12/08 1st Place 2/09 1st Place 8/09 1st Place

System: Chuckle2Tits
CPU
Core i7 920 2.66 45nm D0
Motherboard
Foxconn BloodRage x58
Memory
6 GB Corsair Dom. DDR3 1600
Graphics Card
EVGA GTX 285
Hard Drive
1x500 GB WD Caviar SATAII
Sound Card
Creative X-Fi Xtreme Gamer
Power Supply
Silverstone Decathalon 850
Case
PolymorphiX Prototype v1
CPU cooling
CM Gemini II s (Megahalem pending)
GPU cooling
stock nvidia
OS
Win 7 RC 64
Monitor
Viewsonic VX2255 22" LCD
Overclock.net Mod of the Month
CattleRustler is offline Overclocked Account   Reply With Quote
 
Page generated in 0.05739 seconds with 7 queries