“Chipping away at the stone”
Here are some of the pieces that I have been working on. From L to R: Hinged panel for the LCD POSTer, vertical cove for the mobo-side rear panel to wall support, Pump stand panels and base for one of the two pumps, vertical cove for the PSU-side rear panel to wall support, and the pieces that will make the trap-door access for the CPU and NB loops reservoir.
(
This image of the LCD POSTer screen shows how the hinge looks from the “inside”
This image of the reservoir trap-door shows the “outside” of the hinge:
The completed rear panel:
Some close-ups to show transitions, profiles and easements:
This notch is for the topside of the motherboard rail to nest into.
Mounted in the case:
