The Intelligence - Day 36
The hw store only had 600 grit so I polished the piece that will become the switch-plate trim with it. I was going to rouge it from there but then I realized I needed to cut it out so rouging it would be silly since the finished sides will be sliding along a block of wood, so I decided to cut it out first, then I will rouge it another day
drilled pilots
ready for cut out
Heavy: Oooooo,ahhhhhhhh...
...cry some more, ooooooh ahhhhhh....
...I like this doctor (sandwich) nom nom nom
tada
it needs filing and sanding but it came out ok
remember when I cleared the mobo pan that I painted? remember when I had reservations about it going milky white and not clearing up? It went milky white and never cleared up
so a sanding and repaint was in order (I just love doing work twice, dont you?) light sand with 400
after 3 coats re-spray
now I decided to test Krylon clear instead of &%!!f$$ Painters Touch (rusto). Thats the center hinge I painted a couple weeks ago
theres my honey...
blam
no milkyness, just gloss sex teh
since I was swimming in fumes, I decided to knock out the red bleed on the trim, if you recall...
assembled the weapons. sprayed some paint in the cup and carefully used the brush to mask the bleeds...
bleeds-be-gone
thanks for watching
* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download:
http://www.mod2software.com/worklogc...logcreator.zip