Pump Stands:
(pump still needs to be sleeved-lol)
There are 2 of these, but one of the pumps is in use on the loop that is installed on the test bench.
I'm not sure about vibration. It seems fine as There is a thick "velcro" pad that it will sit on. I was going to go with mechanical fasteners, but I declined the thought for a couple of reasons.
1) I want to keep the case's potentiality as open and dynamic as possible; Velcro-ing the pumps serves this purpose as the counterpart that is attached to the floor of the case is removeable and re-positionable.
2) Vibration. As mentioned before, it is my hope that the Velcro will absorb what little vibration is in the base. I'm not sure if the height of the stands amplifies it or helps to suppress it... again, I will have to test them out.
