Update 3
Just a mini update for today

I had mentioned moving the hdd cage to the 5.25 drive bays to reduce heat in the lower chamber.....well i did it with wh33ls's advice.
To remove the dividers in the drive bays you have to un rivet the whole entire drive bays to get to a little hole to unscrew the badly positioned screw. well wh33ls explained how just drilling a hole through the front, i could get right to the whole without de- riveting....so IT WORKED!!! THANKS!


Before.......


After.........






HDD cage mock
Havnt decided on how i plan to install this.... i was thinking either screw it in with some little anti-vibration gromets, or double sided 4010 tape?


Drilling the holes gotta little messy
I had to get a bigger screw driver on this side because the screw was getting stripped and didnt feel like finding a bigger bit at the time lol... o well lazy me. No one will see this so its fine

Left4Dead

Originally Posted by go4life yoshiba 9/10 Good work both of you