Well on with yet another update
I took on board some suggestions about making the mounting plate of the dvd drive smaller and got on with that today.
First i had to cut some longer bolts to go in place of shorter ones that were holding the green and black bits to the rods as the short ones were now too short. and i removed the protective wrapping that was on the rods
I then shortened one side of the dvd mount
And then i did the other one and mounted the dvd housing notice how now you can hardly see the mounts compared to the massive sheet
I then removed the protective bits that were on the mounts
My tubing hasnt arrived today so hopefully it will arrive tomorrow....
And thats it
Josh