CattleRustler

The Intelligence - Day 43.5 - mini update - stripe de-taping and inner clear coat

detaped both halves, stripe came out pretty clean with sharp edges...





since I had 58F degrees I decided to go for clear on the inner side of of the bottom half. taped off for overspray

I clear coated with the door shut and immediately got the part in a clean box for drying, no pics yet, didnt want to get crap in the wet clear. After I vented out the room for a bit I used a piece of alu bar to slightly prop open one of the corners of the box for venting (not in pic)

Ill have pics of clear coat after drying, and as I progress.

tomr and wednesday are gonna be windy, rainy, and cold, but thrs and fri look better for more clearing work.

cross your fingers with me
thanks for watching



* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop