Quote:
Originally Posted by pioneerisloud
Well...its gotta be a 2ohm or an 8ohm load with this sub. I could very easily settle for a 500w 8ohm load. The sub only handles 750w RMS, and in a ported box, I'm sure the power handling will go down substantially (compared to sealed, which is what this sub is rated for).
|
Behringer rates the EP2500 at 1300 watts bridged at 8ohm

Your never gona clip that amplifier driving that little subwoofer
Those specs are a little inflated though, there is an amplifier measuring thread over at AVS Forums and from memory it could produce 1100 watts bridged at 8ohm which is still silly for home theater use.
I Just think the EP would be better because it is better build and can always be used for other things, such as your main speakers

Plate amps are good but i own lots of subs and the ability to swap amplifiers between different speakers/subs if great
Like i said have a read
http://www.hometheatershack.com/ and
http://www.avsforum.com/ in the DIY subwoofer sections
Also if you need any help designing or with building tips i have build many HT subs

(by the sounds of it so have you) so just PM me if you need specific help