Dragoon

Day 11 - Top panel Part 2

Evening gents (for some )

Sorry I couldn't do any updates yesterday, but I got stuff done today I cut the rest of the top panel window.


First one cut down.


Two down, one to go (took half the time)


Third cut down.


Center cut, and everything straightened and cleaned out.


The second part of the logo could've come out better, but due to the mesh the panel has it complicated my plans, I was expecting it though.

The center hole was a bit tricky, I used the rotary cutting bit and cut it by hand, as the circle cutting tool is too large to fit there, after that, I used the sanding barrel to straighten the edges.

I won't hot glue the acrylic to the back of the panel, instead I'll use M4 Hex screws to fix it in place, I think it gives out a better looking

That's all for this weekend, next weekend I'll hit the rest (Also a 3 day weekend w00t)
Thank you for watching.

__________________
Photo Equip:
Body: Canon EOS XS/1000D | Bag: LowePro Fastpack 250
Canon lenses: EF-S 18-55mm ƒ/3.5-5.6 IS | EF-S 60mm ƒ/2.8 Marco USM | EF 70-200mm ƒ/4L IS USM
Sigma lenses: 30mm ƒ/1.4 EX DC HSM [0/360€] | 10-20mm ƒ/3.5 EX DC HSM [0€/525€]

Project ИιהєBязλκεя Updated May,31 2009

My Flickr