Quote:
Originally Posted by Shiryu_Libra
 Damm it, to dang good to be true 
|
Yeah, to be honest I had thought something was not right with those temps, load temps equal idle temps? I don't think so... But I was blind by the greatness of the copper that I didn't check the sensors...
*epic facepalm* ...dumb of me.
SubUpdate 12.1 - Got teh paintz
Well any way, I got no update today, I went shopping for some christmas stuff with my dad, and while I was out I thought I'd get this:

-Couple of cans of white Primer

-Couple of cans of Satin Black paint w00t

-3 sheets of 240Grit sand paper
-2 sheets of 320Grit Sand paper
I hope that black paint is good, there was some Krylon paint as well, but no Satin black available. And I did forget to get some clear-coat, but I don't think there was any... I need to find out where to get some cans of it.
One again, my apologies for my blindness regarding the temps, I will post new results (AFTER checking the sensors) later on.
CPU [1.2375vID] Q9450 @ 3.6GHz [1.248vCore] |
Motherboard Striker II Extreme BIOS v0901 |
Memory 4x1GB OCZ Platinum EB PC3-12800 @ 1.6GHz |
Graphics Card 2x Asus 9800GX2 Quad SLI @ 650[c]2000[r]1836[s] |
Hard Drive 2x80GB RAID0 + 2x160GB RAID1 - All Seagate 7200.10 |
Sound Card Logitech Z-5400 @ Auzentech X-Fi Forte 7.1 |
Power Supply Zalman ZM850HP (850w)+ Antec NeoPower 550w |
Case Antec P190 |
CPU cooling Noctua NH-C12P |
GPU cooling "Shell-less" 9800GX2 stock cooler |
OS Windows XP Pro SP3 x86 / Windows 7 RC x64 |
Monitor LG 226WA 22" 1680x1050 |