CattleRustler

The Intelligence - Day 54 - Finishing 01

after rouging the roller dial face plates I began attaching stuff and bonding with weld on 3
can of cranberry sauce for weight

the psu shroud that was tack-glued last night, slapped on some 2 ton epoxy on the non-visible side to seal the cylinder to the housing

getting ready to mount the tabs for the roller dial on the inside of the main switch panel

welded and found something for weight

this is the same sort of contraption but for the roller dials that mount by the case handle, after this I began assembling stuff

I'LL SHUT UP NOW

PICS! (sorry flash )







test boot before adding switch panel...





the three rocker switches didnt go down quietly, needed a shade of filing. Afterwards they snapped in

MORE PICS WITH ME SHUTTING THE F UP...













there is still interior work that needs to be done (as you can undoubtedly see) but as for the case itself, and the "case mod" - I thinks the main stuff is done and its presentable, just need better pics (LET THERE BE F-ING LIGHT) sorry, and I need to mount the led's in the switch panel. Couldnt have glued them in and gotten these pics, it was one or the other

cheers

I will update this thread here and there as I fix and finalize the remaining bits


THANKS FOR WATCHING



* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (aluminum)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop