Greenie_poo - Design
messed around in 3dsmax9 with the basic idea: fans in blue (80mm green led), mobo (red), psu (grey), hdd (yellow) (items are to scale) The green panel is 14.5" tall x 14" deep
started to mock in the black panels (1/4" cast acrylic)
I plan to screw the parts together, not use ips weld on to join them permanently. the green cubes are 1/2" that will be drilled and tapped for 6-32 black oxide screws, they will act as panel anchors. the cubes will be ips welded to the black panels
feet from same 1/4" acrylic, using 2x sandwiches, 1" circles
green disks inside case (back. top) are place holders for fan openings, as well as the lower front one. The upper two on front are going to house switches an led's
lets fit the parts...
mobo, psu, and hdd (omitted blue fan boxes as the desing is self-evident)
the left and right panels will be transparent green, pictured opaque here however
the design may change as the project evolves. all input welcome
thanks for watching
* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download:
http://www.mod2software.com/worklogc...logcreator.zip