CattleRustler

Greenie-poo - Design phase 02

since I am waiting for the pc parts and the acrylic to arrive, I continued to revise and tweak the overall design. I added the cutouts for the fans and psu, and finished adding the anchoring cubes, mobo rails, and psu support rails



(dont mind the two green circles, floating off in orbit out there )

added the panel bolts

here it is with the mock up parts added for perspective



door panel on with bolts




looks a bit plain Ill admit, but remember the two green side panels will transparent and the case will be lighted from inside, underneath (maybe), and the fans are green led. I just have to come up with something for the top front area. I was thinking maybe some ergonomic looking drive bay covers (simulated), with one or two of them acting as the plate for the switches and led's. Also on the back I havent decided where to locate the anti-jessie switch/es, I guess Ill need to have the stuff here for that.

cheers, thanks for watching


* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop