CattleRustler

Butcher's Hook - Day 23 - lets build a meathook trolley 01

lets cut some steel, thats a bottle of dark cutting fluid I bought back when doing Jessie's Gumdrop, never found a need for it in lieu of tapping fluid, until now...

need to cut a disk out of that thick 3/8" steel. the thinner stuff (1/8") is for the outter guides on the wheel

clamped up on the hole saw. spread some fluid and began cutting slowly. every so often I had to stop and fill the ring in with more fluid

about 30 mins later...









the wheel needs some stoning, but so far so good on making my own trolley

thanks for watching



* This Worklog post was generated using WorklogCreator - Version: 1.0.1.5
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop