Butcher's Hook - Day 24 -lets build a meathook trolley 02
anyone remember this mod?
last time I was here I cut the inner trolley wheel, well now I needed to cut the outter ones that will sandwich it. 1 7/8 bimetal holesaw, and a 2" sheet of steel (1/8" thick)
set up the steel on the drill press, with a squirt bottle of cutting fluid (super nasty stuff) I wore goggles, a respirator, earplugs, and gloves. I put the drill press by the door and cranked the fan at it. that cutting fluid is pure poison.
couldnt take pics during the cutting due to the hazardous chemicals, but heres the raw cut parts (after having been doused with AI)
test fit with a 1/4-20 screw thats too short
trolley took a back seat for a min, while I widened the wire holes. set up the right angle drill
blam
back to the trolley fab, began measuring out the particulars
decided to cut the front part's hole before cutting it off (easier while its still one big piece)
then laid the part for cutting
after cut off - test fit
went across to the hw store and spent a whopping 49 cents so I could have the right length screw and bolt for the trolley work
after cutting the short top piece (3/4")
clamped
and clamped more
tacked the short sides then blasted some molten steel along the top face
inside weld ready
rough welded part (notice I am not showing the weld inside? lol)
test fit
its leaning forward because theres no weight yet on the back, but there will be tomr
tomr Ill continue on the trolley
thanks for watching
* This Worklog post was generated using WorklogCreator - Version: 1.0.1.6
* Free Download:
http://www.mod2software.com/worklogc...logcreator.zip