Overclock.net › Member Blogs › Overclocking My Q9550 Ep45 Ud3p

Overclocking My Q9550 Ep45 Ud3p

This resulted in BSOD after 5 mins of Prime95-blend. Running 6X multi ("CPU Clock Ratio") it passed blend.

(http://www.overclock.net/blog_attach...1&d=1250786954)
Code:
CPU = Q9550 E0 L847C032
Motherboard = EP45-UD3P
BIOS Version = F8
Ram = 4x1GB Gskill HZ

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 8
Fine CPU Clock Ratio.................: 0.5
CPU Frequency .......................: 3.82


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control...............: 
CPU Host Frequency (Mhz) ............: 450
PCI Express Frequency (Mhz) .........: 100


DRAM Performance Control
Performance Enhance..................: Standard
Extreme Memory Profile (X.M.P.)......: Auto
(G)MCH Frequency Latch...............: 400
System Memory Multiplier ............: 2.00D
Memory Frequency (Mhz) ..............: 900
DRAM Timing Selectable ..............: Auto

Standard Timing Control
CAS Latency Time.....................:
tRCD ................................:
tRP..................................:
tRAS.................................:


Advanced Timing Control
tRRD.................................:
tWTR.................................:
tWR..................................:
tRFC.................................:
tRTP.................................:
Command Rate (CMD) ..................:


Channel A
Static tRead Value...................:
Channel B
Static tRead Value...................:


Motherboard Voltage Control
CPU
LLC .................................: Disable
CPU Vcore............................: 1.2
CPU Termination.....1.200V*..........: 1.2 
CPU PLL.............1.500V*..........: 1.5
CPU Referen.........0.755V*..........: 0.76

MCH/ICH
MCH Core............1.100V...........: 1.2
MCH Reference.......0.800V...........: 0.76
MCH/DRAM Ref........0.900V...........: 0.910
ICH I/O.............1.500V...........: 1.5
ICH Core............1.100V...........: 1.1

DRAM
DRAM Voltage .........1.800V.........: 2.08
DRAM Termination .....0.900V.........: 0.910
Channel A Reference ..0.900V.........: 0.910
Channel B Reference ..0.900V.........: 0.910

Comments

There are no comments yet
Overclock.net › Member Blogs › Overclocking My Q9550 Ep45 Ud3p