Overclock.net › Member Blogs › So My I7 Isnt As Stable As I Thought It Was

So My I7 Isnt As Stable As I Thought It Was

Quote:
Originally Posted by crazyap7 View Post
Just leave everything for the RAM on auto, pull it back to 1333MHz, work on your CPU overclock first. Set the vcore at 1.3v, see what speed you can get stable on that. Remember, QPI/VTT should ALWAYS be within 0.45v of dram voltage, and the following BSOD codes might help when stability testing:
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)

Report back later!
saving

Comments

There are no comments yet
Overclock.net › Member Blogs › So My I7 Isnt As Stable As I Thought It Was