|
![]() |
Overclock.net - Overclocking.net > Cooling > Air Cooling | |
so i lapped my BT and...
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||||
|
Intel Overclocker
|
the temps are the same! what gives?
its not exactly a MIRROR finish, but i went through 7 different grits of sandpaper TWICE! wassup with that?
__________________
OpterOWN 1 | 2 | 3 Macbook Pro 15" 2.2 C2D | 4gb DDR667 | 320gb WD 7200 rpm | Geforce 8600M GT 128mb | OSX 10.5.5
|
|||||||||||||
|
|
|
|
#2 (permalink) | |||||||||||||
|
Wealthy off Welfare
|
Did you put too much/not enough AS5?
![]()
__________________
|| CPUs: A64 3000+ @ 2.81Ghz .:. C2D E6300 @ 3.608Ghz (RIP) .:. C2D E2140 @ 3.2Ghz .:. 4th Best Intel OC @ OCN || GPUs: Fastest 7600GT @ OCN (w/E6300) .:. 126,230 AM3 (7600GT) || Mah tidbit: Doing a complete new build (everything!) at the end of Summer 2009.
|
|||||||||||||
|
|
|
|
#3 (permalink) | |||||||||||||
|
Linux Lobbyist
|
either u put too much as5 on or too little ... or maybe it jus didnt settle in quite yet.. wait a few days for the as5 to settle then u may seem a temp difference..
__________________
|
|||||||||||||
|
|
|
|
#4 (permalink) | |||||||||||||
|
4.0ghz
|
Try lapping the top of your CPU, the IHS part
__________________Also, how much AS5 or other thermalpaste did you put on? The amount of AS5 should have been no more then a grain of rice. If you put too little or too much it might not be efficient. For me, i just put on the AS5 then squish the HSF onto it and that works fine for me. And the AS5 will take a while to burn in, 200 hours is the manufactur suggested burn in time. After that time the temps should be better .
|
|||||||||||||
|
|
|
|
#5 (permalink) | |||||||||
|
PC Gamer
|
If it was already very very smooth, then it might have been as good as it gets.
__________________
Saying Ubuntu is for people too lazy to use real Linux is like saying people who buy BMWs are too lazy to build their own car.
|
|||||||||
|
|
|
|
|
#6 (permalink) | |||||||||
|
Overclocker
|
Honestly IMO there is no, if VERY VERY LITTLE difference when you lap the TTBT, because it is prelapped (to an extent), and it takes away so much heat at once, but can only take away as much as the ambient temp allows. I can't really think right now (so I am not going to explain very well) as I got back from a day of water skiing, but you get it right?
__________________
Quote:
|
|||||||||
|
|
|
|
|
#7 (permalink) | |||||||||||||
|
Intel Overclocker
|
i usually apply about a BB sized dot of AS5 so i dont think its too much. i really dont want to lap my IHS because it would void the warranty and i still have 3 yrs left on it.
i know i know, but im a real chicken when it comes to voiding my cpus warranty.
__________________
OpterOWN 1 | 2 | 3 Macbook Pro 15" 2.2 C2D | 4gb DDR667 | 320gb WD 7200 rpm | Geforce 8600M GT 128mb | OSX 10.5.5
|
|||||||||||||
|
|
|
|
#8 (permalink) | ||||||||||||||
|
..the party can start now
|
Quote:
You obvs have never seen my TTBT... The lap job looks like someone tried cuttnig through the copper with a butter knife and that's how it turned out. There's like...speedbumps in it.
|
||||||||||||||
|
|
|
|
#9 (permalink) | ||||||||||
|
Overclocker
|
Quote:
![]()
__________________
Quote:
|
||||||||||
|
|
|
|
|
#10 (permalink) | ||||||||||||||
|
4.0ghz
|
Quote:
![]()
|
||||||||||||||
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|