Zerotherm Apack btf 95 - Overclock.net

Ronhill · 06-02-07

pls tell me how good is it,my friend hails him to the heavens,talking his idle is 20 C and loaded 35 C(on e6600 overclocked to 3.2ghz)...this cooler and artctic silver 5 therm past...little hard to believe indeed but how good is it?

hero or zero · 06-02-07

what cooler is he using. Whatever it is it does sound pretty good

Ronhill · 06-02-07

hes using that cooler,if u thinking about fan,i dont know...but still!!!33 c!!!

murcielago585 · 06-02-07

its supposed to be a decent cooler. frozencpu.com have a top ten list and I think its second or third in the list under the ultra 120 extreme so its a very decent cooler. I havnt been able to find it in canada, so i didn;t even bother considering it, I think VR zone has a pretty in-depth review of it as well.

Ronhill · 06-02-07

Quote:

Originally Posted by murcielago585

its supposed to be a decent cooler. frozencpu.com have a top ten list and I think its second or third in the list under the ultra 120 extreme so its a very decent cooler. I havnt been able to find it in canada, so i didn;t even bother considering it, I think VR zone has a pretty in-depth review of it as well.

oh i though it was an ultimate one,because this temperatures looks toooo good for me...maybe different thermal paste affects in reducing temperatures very much?

murcielago585 · 06-02-07

I doubt it, I think its pretty obvious that whatever program he is using to measure the temp isnt giving the right temps. this problems seems to be a very popular one within this forum

sorry, vr zone only tested the 80 and 90, but they are almost the same except for a few new enhancement. These temps are nowhere near the 33 mark

http://www.vr-zone.com/index.php?i=4166&s=4

Ronhill · 06-02-07

Quote:

Originally Posted by murcielago585

I doubt it, I think its pretty obvious that whatever program he is using to measure the temp isnt giving the right temps. this problems seems to be a very popular one within this forum

sorry, vr zone only tested the 80 and 90, but they are almost the same except for a few new enhancement. These temps are nowhere near the 33 mark

http://www.vr-zone.com/index.php?i=4166&s=4

but still u can agree that it depends in great affect what paste u use and how u put it on your CPU?

murcielago585 · 06-02-07

I do, but most tend to use AS5 when overclocking anyways and use the line down the middle method instructed by AS5 for the CD2, so it shouldn't really be that much different than most users. I believe that that cooler is a very good one, one of the best, but 33 sounds a little too good, but maybe i'm just jealous. He may have a very good CPU that uses very low volts at the frequency, but I know programs like TAT have been very unrealiable with certain chips, especially the E4300. Apparently speedfan is quite accurate because it measure the T junction temperature of the cpu. what did you friend use software-wise to measure the temps?

Ronhill · 06-03-07

Quote:

Originally Posted by murcielago585

I do, but most tend to use AS5 when overclocking anyways and use the line down the middle method instructed by AS5 for the CD2, so it shouldn't really be that much different than most users. I believe that that cooler is a very good one, one of the best, but 33 sounds a little too good, but maybe i'm just jealous. He may have a very good CPU that uses very low volts at the frequency, but I know programs like TAT have been very unrealiable with certain chips, especially the E4300. Apparently speedfan is quite accurate because it measure the T junction temperature of the cpu. what did you friend use software-wise to measure the temps?

i havent asked him i will when i see him and gladly post u his answer

and i think the same 33 really sounds too little on e6600 overclocked 800 hmz from stock setting

		Overclock.net - Overclocking.net > Cooling > Air Cooling
Zerotherm Apack btf 95

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)