|
![]() |
Overclock.net - Overclocking.net > Cooling > Air Cooling | |
Will the AC Freezer 7 Pro fit in my case alright?
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||
|
PC Gamer
|
I'm getting ready to buy some things from newegg. I'm planning on getting an AC Freezer 7 Pro 92mm, and an Asus P5N-E mobo. My case is the Centurion 5, so I just want to make sure that everything will fit alright. Thanks for the help in advance.
__________________
To Do List 1) Paint inside of case.
2) Get side window. 3) Mirror on bottom of case. 4) Light the case up!
|
|||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
Don't Fail Too Hard..
|
Yea it should fit fine. I'm saying this because thats a very popular cooler on this site and no one seems to have had problems fitting it in their cases.
__________________
|
|||||||||||||
|
|
|
|
#3 (permalink) | ||||||||||||
|
is Stig's seasonal cousin
|
It should. you could check the dimensions of the case and the dimensions of the freezer 7 and see if you have a lot of extra space in the case. the freezer 7 will be ontop of the mobo, so take that into account and also note how much space there is behind the mobo.
__________________
480 GTX Club BlockHeads: the thread OCN Headphones Club4.0ghz Cpu-Z Validated ![]() ESI Juli@ -> Soloz Audio Reference RCA -> TCA Gizmo -> Onix SL-1 wire -> AV123 ELT525M's
|
||||||||||||
|
|
|
|
#4 (permalink) | ||||||||||||||
|
Intel Overclocker
|
Review on Newegg:
Quote:
__________________
CPU-Z Validation at 3.4Ghz! 10749 in 3DMark06! | P4885 in 3DMark Vantage ![]() Quote:
|
||||||||||||||
|
|
|
|
#5 (permalink) | ||||||||||||
|
is Stig's seasonal cousin
|
nice catch. perhaps it won't fit then.
__________________
480 GTX Club BlockHeads: the thread OCN Headphones Club4.0ghz Cpu-Z Validated ![]() ESI Juli@ -> Soloz Audio Reference RCA -> TCA Gizmo -> Onix SL-1 wire -> AV123 ELT525M's
|
||||||||||||
|
|
|
|
#6 (permalink) | |||||||||
|
PC Gamer
|
Dang, well is there another cooler that any of you would recommend? It needs to stay fairly cheap.
EDIT: I've decided to get the Freezer 7 anyways, shouldn't be too hard to shave the plastic down.
__________________
To Do List 1) Paint inside of case.
2) Get side window. 3) Mirror on bottom of case. 4) Light the case up!
Last edited by chem_opa19 : 10-20-07 at 06:08 PM. |
|||||||||
|
|
|
|
|
#7 (permalink) | |||||||||||||
|
Mmmm! Toast!
|
I run a Freezer 7 on my P5N-E SLI. Its tight. But it DOES fit.
__________________
|
|||||||||||||
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|