Darkshadow74

I hope I am putting this in the right place, and also hope I am asking about the right thing. I am wanting to put a aircooled heat sink on the memory controller on a EVGA 122-CK-NF68-A1, but not sure where to look, or what to look for. I am not going to be going water cooling for a couple to 6 months min, and also been told that watercooling the Memory controller is a waste of time and energy and just to put on a Aircooled on. Also can some one recommend a good SB aircooler if this one on the stock board isnt up to snuff. I know when i go WC i will be WCing the NB. But not the SB. Thank you for your time.
Darkshadow74

G|F.E.A.D|Killa

make your own. itook a small fan and put it over my voltage regulator and that helped with stability. so try that with your memory controller.

__________________

23055 3DMark06

My E8600

5.0Ghz E8600

Darkshadow74

Ok here we go, maybe this will help me, Is the Memory controller, the same as the MOSFET? The reason i am asking is i was looking into adding a heat into the MOSFET, and in reading reviews about this MB, i am hearing alot saying that the memory controller is over heating and frying out. And if they are the same i have found a good one I think for about $20. Just want to make sure i am learning and understanding the layout of the MB. Thank you for your help and the info.
Darkshadow74