|
|
|
#141 (permalink) | |||||||||||||
|
Case Modder
|
![]() ![]() ![]()
|
|||||||||||||
|
|
|
|
|
#142 (permalink) | ||||||||||||
|
Overclocker
![]() |
nice pics
__________________and welcome to OCN
|
||||||||||||
|
|
|
|
|
#143 (permalink) | |||||||||||
|
Overclocker in Training
|
This is my Air Monster!
__________________4x 92mm Vantec Tornado 110.5 CFM 4x 92mm Vantec ThermoFlow 34.8 - 58.5 CFM 1x AMD CPU FAN and the Fan on my CPU ![]() Like to see someone with more air than this.
Last edited by SentrySkills : 08-31-08 at 06:30 PM |
|||||||||||
|
|
|
|
|
#144 (permalink) | |||||||||||||
|
Hellspawn or Hell's Pawn?
![]() |
Quote:
![]()
__________________
It's "I couldn't care less" (Because you don't care)
|
|||||||||||||
|
|
|
|
#145 (permalink) | |||||||||||||
|
WaterCooler
![]() |
Accelero S1 Rev.2 With a Yate Loon High Speed Zip Tied to it.
Zalman 9700 with a Panaflo behind it exhausting hot air out at 114CFM. Cool air goes gets sucked in the front Tri-Cool then into another Tri-Cool then goes into my Zalman 9700 then exits my case through the Panaflo.
Last edited by DennisC : 09-01-08 at 10:53 PM |
|||||||||||||
|
|
|
|
|
#146 (permalink) | |||||||||||||
|
Hellspawn or Hell's Pawn?
![]() |
Quote:
__________________
It's "I couldn't care less" (Because you don't care)
|
|||||||||||||
|
|
|
|
#147 (permalink) | |||||||||||||
|
WaterCooler
![]() |
I have the fan on a fan controller and its not making that much noise.
|
|||||||||||||
|
|
|
|
|
#148 (permalink) | ||||||||||||||
|
4.0 GHz
![]() |
Quote:
![]() only 13 fans now - sold my 2x HD3870's - fallen back to my 7900GS till the HD4850x2 comes out [i hope it does in Australia....] Got some more to add when i get the chance also - can i get a straight on shot (side) of your case also Adrien - would like to know how some of them are mounted
__________________
|
||||||||||||||
|
|
|
|
|
#149 (permalink) | |||||||||||||
|
Hellspawn or Hell's Pawn?
![]() |
Quote:
Suggestion for you: Flip the PSU so it intakes from under the graphics card, remove the PCI brackets under the card and add two 60mm fans for exhaust, and add another 120mm in the 5 1/4'' bay area. That was an old pic so I'll try to find more...here we go: ![]() ![]() ![]() Zip-ties all the way
__________________
It's "I couldn't care less" (Because you don't care)
|
|||||||||||||
|
|
|
|
#150 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
What you cannot see from the picture......
I have a 120x38mm fan in the 5 1/4" bay. There is a vent/grill under the case from the PSU fan - so the PSU is getting the fresh cool air from outside the case. [as in this picture http://www.nickfire.com/public/cm690/cm630%20011.jpg] PCI brackets are now gone also Also - zip ties rule ![]() Any other suggestions
__________________
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 2 (1 members and 1 guests) | |
| mfb412 |
| Thread Tools | |
|
|