[Guide] TRUE Information Thread.

[dmhnc]

bowman, glad you got it worked out. Those clips are a real pain.

[bowman]

In fact, I didn't 'work it out', I used zip ties.

I'll post some temps later on when I figure out the drivers for this AMD/ATI/BBQ chipset (never had one before) and get set up properly.

[kathman]

Originally Posted by bowman

In fact, I didn't 'work it out', I used zip ties.

I'll post some temps later on when I figure out the drivers for this AMD/ATI/BBQ chipset (never had one before) and get set up properly.

hahaha, I did the same with my ultimate 90, man thoese clips are annoying xD.

[mega_option101]

Seeing as the TRUE is popular here on OCN. I have added this thread to the sticky called "Air Cooling Essentials Thread".

[dmhnc]

Sweet. I'll be updating soon. Right now I'm running my TRUE fanless. Temps are about 38c at idle and about 55 to 60c at load. This is with an oc of a little over 3.8. I just bought a new DFI and ddr3 ram and it's running fine but I've had very little time to tweak. I'm out of town right now but when I get back home I'll make some time to work on it. BTW I just had some Delta fans that were shiped out to me this morning. They are the high volume ones so I'll post with what effects they have on temps.

[mega_option101]

Originally Posted by dmhnc

Sweet. I'll be updating soon. Right now I'm running my TRUE fanless. Temps are about 38c at idle and about 55 to 60c at load. This is with an oc of a little over 3.8. I just bought a new DFI and ddr3 ram and it's running fine but I've had very little time to tweak. I'm out of town right now but when I get back home I'll make some time to work on it. BTW I just had some Delta fans that were shiped out to me this morning. They are the high volume ones so I'll post with what effects they have on temps.

Thanks for the update

Let me know if you need anything.

[dmhnc]

Just got these high volume Delta fans today. I'll be installing this weekend.

[raydeon]

1. Poorly lapped
2. Q6600 G0, 3.6ghz, 1.392v, not lapped.
3. Ultra Kaze 120mmx38mm @2766 RPM 100 cpm
4. idles at 35c, loads at around 50s c, amb = mid 30s c

[dexterz]

Not yet lapped
E4400 2.0GHz, OC'd to 3.0GHz, Vcore 1.21(Idle) 1.34(load), Not lapped
Scythe Kaze Jyuni 2000RPM 110CFM
Case/Ambient 36C Idle 48C Load 68C.....not brave enough to run OCCT or Prime95 for half an hour with that much high load temps

[dmhnc]

Originally Posted by dexterz

Not yet lapped
E4400 2.0GHz, OC'd to 3.0GHz, Vcore 1.21(Idle) 1.34(load), Not lapped
Scythe Kaze Jyuni 2000RPM 110CFM
Case/Ambient 36C Idle 48C Load 68C.....not brave enough to run OCCT or Prime95 for half an hour with that much high load temps

36c ambient? What do you have for a case and what fans? Sounds like you have poor case ventilation or a hot room.