[Guide] TRUE Information Thread.

[justarealguy]

Originally Posted by tkl.hui

woah nice temps justarealguy. Makes me want to reseat mine

ehm, its supposed to be 52, not 42 lol, typo sorry

edit: sorry agian lol, I cut my index finger really nastily on the panaflow (DAMN THEY HURT) and I cant use it at all...typing with my middle finger (right hand) and its difficult hehe...

[Duckydude]

I have a lapped TRUE with a lapped Q6600 and I get 24 idle and 44 - 48 load .

[The_Rocker]

Originally Posted by Duckydude

I have a lapped TRUE with a lapped Q6600 and I get 24 idle and 44 - 48 load .

I take it that is the G0 stepping?

[Duckydude]

Originally Posted by The_Rocker

I take it that is the G0 stepping?

Yeah .

[The_Rocker]

Wish I had a G0... Mind you, I am happy with my temps. I get good enought temps that allow me to run 3.6Ghz 24/7.

35-40 idle..... Only goes up to 65-70 when using small fft with Prime95. But as there are no normal games or programs which can create that heat, I am fine.

[Duckydude]

Originally Posted by The_Rocker

Wish I had a G0... Mind you, I am happy with my temps. I get good enought temps that allow me to run 3.6Ghz 24/7.

35-40 idle..... Only goes up to 65-70 when using small fft with Prime95. But as there are no normal games or programs which can create that heat, I am fine.

Yeah, that's true, I wouldn't worry about the temps .

[RickJS]

What kind of temps can I expect from a B3 quad when this arrives?

[The_Rocker]

Originally Posted by RickJS

What kind of temps can I expect from a B3 quad when this arrives?

Mine is lapped, as is my CPU and I am getting at the moment @ 3.6Ghz at 1.45/1.46 V Core: 30-35 idle, nothing makes it go over 50-55 unless I use Prime95 or Orthos.

You might not have to lap it, but I had to.

[tkl.hui]

Hey everyone, I just reseated my TRUE and oced to 3.6ghz with 1.475v in bios. Heres a screen of temps, voltage etc. Temps seem kind of high to me so I think i screwed up reseating it. Guess i should reseat again, but i'm not going to reseat again until I get some AS5.

[franz]

Originally Posted by afzsom

Also, just to be clear for anyone posting temperatures, we need to have a common method of getting load temps (i.e. one person using Orthos and another using CS:S for load isn't comparable). I suggest we use Orthos Small FFTs for 30 minutes to gauge load temps.

Good point. Just like everyone should be getting temps from Coretemp.

Originally Posted by dmhnc

Shaping up nice I'll start a Rank List soon.

I think I should also include case temp as well as ambient, idle and load.

If you can think of anything else that I need to include just let me know, thanks.

You will have to separate these result somehow to make it clear. Obviously my Core2 Duo will have lower temps than a Quad. Maybe all dual cores in one chart and quads in another. Then ranked by best temp per voltage. Sorry not trying to make a lot of work for you. I just want an easy to read comparison.