mugan23

ok i need a fan layout, i need to drop some more temps because i want to run my q66 @ 1.5 24/7. the cooler is a mine rev-b pressure modded,lapped and a new 2500 120mm has replaced the stock 900rpm 100mm. the only fan that will fit in the center is a 120x25 i am willing to buy any fan out there and if some one can tell me how i would like to set up 2-3 fans on the cooler its self but its kinda hard due to the shape. here is my thread

__________________

Adrienspawn

Well if you sell the mine, then for the price of 2 good fans you good get a Xigmatek. If not, theres lapping and adding little mini-heatsinks to the base of the mine.

See my sigged thread on water temps for inspiration.

If you decide you will go the modding way instead of buying a new HS, then a good fan can be bought from Scythe, I recommend getting the best one you can, mainly choose the one with the highest dba you can tolerate.

There's also case mods which help a lot, and you can search in the case mods section for inspiration.

__________________
It's "I couldn't care less" (Because you don't care)

mugan23

how much better is the Xigmatek to my mine

__________________

go.kyuu

mine cooler lol?

mugan23

that bad

__________________

Adrienspawn

I haven't heard of the mine, but probably about 5C.

__________________
It's "I couldn't care less" (Because you don't care)

mugan23

mine

__________________

noobdown

evercool alumiun fans

__________________

ATi 4830 Club

Adrienspawn

Looks not bad, just lap/mod it.

__________________
It's "I couldn't care less" (Because you don't care)

mugan23

i intend to. i am currently ordering one of those kaze 133cfm fans and a fan controller <so i can turn my rig into a portal gun>, hopefully it will be enough

__________________