Adrienspawn

Man everything there is so much more expensive though.

__________________
It's "I couldn't care less" (Because you don't care)

Adrienspawn

BUMP cus ppl keep asking about good fans!

__________________
It's "I couldn't care less" (Because you don't care)

UkGouki

i couldnt vote but i have a total of 9 fans 5x 120mm tri cool 2 on case floor 1 pulling air off my hdd cage facing gpu 2 pulling in air from the front of the case 1xtt 120mm top intake 2x 140mm TT 1 rear exhaust the other front intake and my 230mm tt window fan

its not very load at all about 25db i think i have the intakes on medium flow loadest fan is on the hdd cage seems to run at highest speed even though i set it to medium flow its controlled off of my mobo :-/

iandh

More like, can you sue them if you lose a finger?

Adrienspawn

Theres these 200mm , 10cm thick industrial fans at this electronic place nearby.......must......resist....

__________________
It's "I couldn't care less" (Because you don't care)

Adrienspawn

Bump # one million

Because I know people love this but are too shy to post?

__________________
It's "I couldn't care less" (Because you don't care)

porky

just got myself 4x Vantec stealth fans...

they are rated at moving 55cfm , which is very low , but for case fans...thats more than enuff , and they are extreemily silent

__________________
My GTX280 VS 4870X2 Review!http://www.overclock.net/graphics-ca...-showdown.html

GRID Drift Club

Rpg2

Maybe this is the wrong thread to post this in, but it looks like it belongs here.

I have a Scythe Slip Stream 110CFM fan as an intake fan on a Centurion 5. It's pulling through the bezel mesh and I left the filters on as I saw how much dust those filters collected. Since it is a 120x120x25cm fan and after I saw the collection of fans in this thread, I was wondering if I should get the Scythe Ultra Kaze 2000RPM fan (33DBA/88CFM one) to replace it? The fan feels like it's airflow is being restricted because of the mesh and filters.

Would the Ultra Kaze push more air than the Slip Stream through the mesh and filters even though the Slip Stream is 110CFM and the Ultra Kaze is 88CFM?
If I did get the Ultra Kaze, I would add the Slipstream fan on my TRUE to get a 2nd fan on it. I have the S-Flex SFF21F as the main fan on my TRUE.

Even though the Ultra Kaze is thicker, it should still fit where ever the Slip Stream can fit and that it uses the same screws, right?



My questions aside, great thread. I found it very helpful and I personally think this is worth a sticky seeing as how many people ask what fans to get all the time. If I had the power to, I'd sticky this myself.

Free Bump.

UkGouki

No it would not would actually impede more i personally would put the 88cfm on the cpu cooler use the higher cfm fans on intake

Adrienspawn

Yes the 110 will probably pull better, but the 88cfm would push what air it can get better. Stick the 120x25mm on the intake and back of the TRUE, and save the 38mm for front of true.

__________________
It's "I couldn't care less" (Because you don't care)