Jaycee8980

Ok i have an amd xp 3200+ with no overclocking..im running both motherboard monitor and speedfan..speedfan is saying that i have a temp 1 of 41 C, temp 2 of 74 C, HD0 of 35 C, and a temp 1 of 80 C..Both the temp 2 and the 2nd Temp 1 have a fire icon next to them..is there a problem?

CyberDruid

Yes I would make sure the Heat sink is properely seated with a proper amount of thermal paste

__________________
Nothing to see here...just move along.

Ludaz

I don't think that could be right. If a 3200 was running at 80C I think it would definantely shut down, if not fry.

My bet is that the temp monitors are off, but as ^^^ said I would reseat the heatsink and do the thermalpaste thing.


How many fans do you have in your system?

EDIT: I think it would help if you put your system specs in your sig/whatever-that-thing-is-called. What videocard do you have? It could be a erhm...slightly hot video card perhaps.

claymanhb

Make sure you have the progs set up properly. My motherboard monitor says -2*C for my CPU.

Roboot and look at the health monitor in the bios.

__________________


Mobile rig: Gateway 6860FX (heat you can pack)
C2D T5550, 4gb 667,320GB, 8800M GTS 512, Dual boot-Vista 64/XP Pro 32
(Will be upgrading to 2x 320gb hdds in RAID)

Jaycee8980

I have an Nvidia 5200..it routinely gets to 90 dgrees out ehre could that be why? and oh ya i have 2 fans

Jaycee8980

And the temps right now r temp 1= 38 C temp 2= 55 C HD= 32 C and temp1 =54 C...Both the temp 2 adn the second temp 1 have a fire icon next to them..is that bad..im using speedfan to measure it out.

gcraw5100

your fx5200 has temp prob that is new.

__________________
Fold For Overclock. 2nd place is 1st loser.
Refresh is Good.

n-sanity

ye peepl, i also have somethin similar... check my rig showcase for the computer im installing windows on right now. I had 3 fans in the back blowing in, and a psu fan like 10 cm above it blowing out.. so i pretty much got no circulation - and hat 39 idle for cpu, 52 for chipset, and 40 for pwm. Not sure wat my vid card is, but its VERY hot. Anyway, i just replaced all the fans, and now have one intake at the front, one exhaust fan ont he back, one psu fan also working exhaust obviously, and one at the side doing intake as wel.. I have placed a slim icepack right in front of my intake fan. It seems to help... althought i cant get any temp readings since im reformatting a 160gb.
Its gona take me liek another hour. So when i stop, ill post the temps. they reaallly dont feel very good right now..