drake-182

This is probably a really stupid question, but..

I currently have an Antec Three Hundred Case, with fans in all the available slots, including the side one.

But, I can't figure out how I'm supposed to connect the one on the side to the MOBO fan controller when it seems that the goddamn cable is impossible to reach if the case is open...

Also, is there like a quick release fan cable I can get so, like, if i opened the case the side fan would automatically disconnect? or whatever?

Help please guys

rpm666

Could try to find a molex to 3 pin fan connector, they usually come with the standard antec tricool fans. Or find a 3 pin extension cable from www.frozencpu.com

http://www.frozencpu.com/products/10...?tl=g2c251s634
http://www.frozencpu.com/products/10...?tl=g2c251s637

__________________

kaivorth

Normally, I think you would get a 3pin converter to a molex connector so you can plug them in to your PSU

__________________
Diamond Lapping Service!! PM if your interested
Personnel HD3300 Benchmark!!!

Arctic Cooling MX-2 > OCZ Freeze

Source

JEK3

Probably the only thing you can do is get a fan extension cable (http://www.newegg.com/Product/Produc...ension&x=0&y=0).

Alternatively, get some wire from Radio Shack, cut your fan cable, and solder in an extension (make sure you insulate the connections).

__________________
Rig complete, and folding for 37726...

wufuhimself

the 3 rosewill 120mm's i just got for my antec 300 came with molex/3 pin extension type deal, i'm sure they sell them for < 1$

__________________