|
|
|
 |
Overclock.net - Overclocking.net > Cooling > Air Cooling | |
OCZ Vendetta 2 With OCZ Retention Brackets
|
||
 |
|
|
LinkBack | Thread Tools |
03-14-09
|
#1 (permalink) | |||||||||||||
|
Overclocker
Join Date: Dec 2008
Location: Richmond Hill, Ontario
Posts: 209
Rep: 14
 Unique Rep: 12
Trader Rating: 0
|
OCZ Vendetta 2 With OCZ Retention Brackets
Temps of E6750 w/ Push-pins (If you can't see it clearly, scroll down)
 The Products  The Parts:  Retention Bracket  Finished    Tests (Check thumbnails, the second one)  Conclusions 3.6 w/o Retention Brakets -> Idle - 30C Load - 57C  3.6 w/ Retention Brakets --> Idle - 27C Load - 58C  Idle temps are better by 3C but load tems are up by 1C. I think I didn't apply thermal paste correctly thats why load temps are 1C higher. Not too bad, could be better. If I have time I might reapply TIM. Thanks guys for staying tuned. Now i'm gonna go for 4.0GHz 
__________________
Last edited by Guamon : 03-18-09 at 03:09 PM |
|||||||||||||
|
|
|
03-14-09
|
#2 (permalink) | |||||||||||||
|
Overclocker
 
|
Subscribed! I'm really interested in the results as I'm planning on getting a retention bracket at some point.
__________________
|
|||||||||||||
|
|
|
|
03-14-09
|
#3 (permalink) | ||||||||||||
|
New to Overclock.net
|
Interesting. I just bought the xigamatech one for my vendetta. Haven't test it yet but much more secure than push pins. Waiting for your results =]
__________________
 ATi 4830 Club
|
||||||||||||
|
|
|
|
03-14-09
|
#4 (permalink) | ||||||||||||
|
Case Modder
|
Will be interested to see the results too, as I Fabricated my own bolt thru retention backplate mod, as per link in sig.
__________________
The Sled Acrylic Tech Bench | Smooth-n-Fold Cube Case Mod | OCZ Vendetta 2/AC-Freezer 7 Bolt Thru Mods | External CMOS Reset Key Switch Folding@home-T32
|
||||||||||||
|
|
|
|
03-14-09
|
#5 (permalink) | ||||||||||||
|
ATI Enthusiast
|
I use the Xigmatek bracket for my Vendetta 2, works great. I'll be checking back here later.
__________________
|
||||||||||||
|
|
|
|
03-15-09
|
#6 (permalink) | |||||||||||
|
New to Overclock.net
|
Sexy bracket
__________________ I had to cut some off the black part of my pushpins to stop the thing bending my board severely! So this looks a much better job. The base of my cooler (Gladiator Max) was not very flat - how was your Vendetta?
|
|||||||||||
|
|
|
|
03-16-09
|
#7 (permalink) | |||||||||||||
|
New to Overclock.net
|
it will work, OCZ heatsink made by Xigmatek.
__________________
|
|||||||||||||
|
|
|
|
03-17-09
|
#8 (permalink) | |||||||||||||
|
Overclocker
|
Hey Guamon, are your tests done yet? I'm looking forward to the results!
__________________
|
|||||||||||||
|
|
|
|
03-18-09
|
#9 (permalink) | |||||||||||||
|
Overclocker
Join Date: Dec 2008
Location: Richmond Hill, Ontario
Posts: 209
Rep: 14
Unique Rep: 12
Trader Rating: 0
|
Finished testing check OP. Now i'm going for 4.0GHz hopefully
__________________
|
|||||||||||||
|
|
|
|
03-19-09
|
#10 (permalink) | |||||||||||||
|
Overclocker
|
Hmm, doesn't look to be a large improvement...
__________________
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
