redalert

Well I order MegaPrime over the weekend just to see how good it really is so I plan on doing some testing with my Q9450 and an E8400 which I will pick up tommorow. I will do the testing in my case my CM690. The fan I plan on using is the Scythe S-Flex 75 CFM. I would like to use the NMB-MAT Panaflo 86.5 CFM but im not sure if the Megaprime that im getting comes with the newer fan clips. I won't be doing any lapping or push/pull setups cause im too lazy .

The fans that will be in my case will be a Nanoxia FX12-2000 79CFM for front intake, a Scythe Scythe 140mm 61CFM side intake. For the exhaust fans a NMB-MAT Panaflo 86.5 CFM undervolted to 7v with a resistor and 140MM Sharkoon S1402515P-3 82CFM for top exhaust.

I will do 15 runs of Linx and will have my fluke meter to get an accurate ambient temp and using OCZ Freeze. The Q9450 will be tested at 3.6 and the E8400 @ 3.96. I will have screenshots of all the voltages and the ambient temps. I know that MegaPrime will win but I figured people would be interested in this.

Attached Thumbnails

 

__________________

GSingh

Can't wait to see.

__________________

redalert

just an update I got the E8400 in my computer ATM just looking for a stable overclock. My vid is 1.30 friggin awful

__________________

Inktfish

Could you edit the first post with some more alinea's in it and less specs of fans?
The only thing I know now after 3 times reading is that you misspelled megatron and that you have ****loads of fans in your collection o.O

__________________

redalert

yea I can edit it with more lines

__________________

Inktfish

Thanks
Ah very nice
A test
First I thought you needed advice to which one was a better buy xd.

The 75 CFM s-flex fans are 1900 RPM?
The setup looks nice
Having both a quad and a dual core

__________________

redalert

yes its the 1900 RPM. The E8400 was a good deal only $120 so I figured what the hell. Its a real shame I got a crappy VID but I got it stable @ 3.96 which is what I will use for the tests. Im just waiting on the heatsink and S-Flex from performance pcs on Thursday and I can start testing

__________________

redalert

Just got the heatsink from performance pcs testing will start ASAP

Attached Thumbnails

 

__________________

redalert

The first test is with the E8400 @ 3.96 1.37 vcore in Windows with the Noctua with S-flex running Linx atm should be done in 20 minutes. I will have pics up with ambient temps from my fluke meter

__________________

redalert

finished 1st test results in 1st post

__________________