-~=Scythe Mugen 2 Information Center and Club=~- Update 7/3/2009 - Page 19 - Overclock.net

grey.clock · 07-07-09

Quote:

Originally Posted by Dopamin3

Filling out location in the left pane is nice

I can actually read very well, thank you.

looks like you need to eat your own advice before you serve it to others.

Broodman · 07-07-09

Quote:

Originally Posted by mikeml

will the mugen 2 interfere with mushkin ram?

No, not really. I have the blue DDR3 ones, and all you have to do is put the fan retention clips a couple "plates" on the mugen.

Picture of the board, cpu, mugen, and RAM

Picutre of the whole thing in my Sniper case. LEDs are off.

diegolaz · 07-07-09

Sorry if I generated any confusion. In my profile I hade country = Argentina and now I added location "Buenos Aires, Argentina" but it doesn't seem to show on left site of my posts.

On topic: any new one with more pictures of the Mugen 2? More CM690 with Mugen 2 installed?

Edit: Off topic, looks like location did the trick

Tommie · 07-07-09

I got a CM 690 with a Mugen 2.
Its seriousle no problem at all to fit it. I have it blowing sideways with a exhaust fan next to it and an exhaust fan right above it. It works perfectly.
It surprises me that this cooler has gotten attention here on OCN so late. Its cheap and really good.

pez · 07-07-09

Quote:

Originally Posted by grey.clock

looks like you need to eat your own advice before you serve it to others.

Haha good point and nice ss of his post count too

.

Quote:

Originally Posted by Tommie

I got a CM 690 with a Mugen 2.
Its seriousle no problem at all to fit it. I have it blowing sideways with a exhaust fan next to it and an exhaust fan right above it. It works perfectly.
It surprises me that this cooler has gotten attention here on OCN so late. Its cheap and really good.

So it fits with the exhaust fan on? You have a picture?

Quote:

Originally Posted by Broodman

No, not really. I have the blue DDR3 ones, and all you have to do is put the fan retention clips a couple "plates" on the mugen.

Picture of the board, cpu, mugen, and RAM

Picutre of the whole thing in my Sniper case. LEDs are off.

Added your case to the "Fit List".

-Cooler Master CM-690 (Side fan can remain on in some orientations)
-Antec 300
-Cooler Master HAF 932
-Cooler Master Storm Sniper

mushrooshi · 07-07-09

Quote:

Originally Posted by pez

Haha good point and nice ss of his post count too

.

So it fits with the exhaust fan on? You have a picture?

Added your case to the "Fit List".

-Cooler Master CM-690 (Side fan can remain on in some orientations)
-Antec 300
-Cooler Master HAF 932
-Cooler Master Storm Sniper

Actually, I meant the side fan on the case... it does not fit...

I'll add to the list

laurie · 07-07-09

You can add the Silverstone FT01 to the case list.
Its a high performing and very neat case. The Mugen is nowhere near the side window.
I could even mount a fan high over some patriot ram.

Would it be worth mentioning in the OP that you can use ram with a large heatsink if you are happy to mount the fan high on the Mugen. So the retention clip sits between some of the fins. So long as the case is wide enough it could help some people out.

pez · 07-08-09

Quote:

Originally Posted by mushrooshi

Actually, I meant the side fan on the case... it does not fit...

I'll add to the list

Well Tommie just posted saying he had his with the side fan on

.

Quote:

Originally Posted by laurie

You can add the Silverstone FT01 to the case list.
Its a high performing and very neat case. The Mugen is nowhere near the side window.
I could even mount a fan high over some patriot ram.

Would it be worth mentioning in the OP that you can use ram with a large heatsink if you are happy to mount the fan high on the Mugen. So the retention clip sits between some of the fins. So long as the case is wide enough it could help some people out.

Updated

Fit List
-Cooler Master CM-690 (Side fan can remain on in some orientations)
-Antec 300
-Cooler Master HAF 932
-Cooler Master Storm Sniper
-Silverstone FT01

Dopamin3 · 07-08-09

Quote:

Originally Posted by grey.clock

looks like you need to eat your own advice before you serve it to others.

I would put it if it would have any importance AT ALL. I'm not asking anything dependent on location. Also learn to resize your picture so it doesn't take up the whole freaking screen (coming from 1920 x 1080 monitor). Thank you captain irrelevant!

Back on topic: What is the best way to mount a second fan on the mugen 2? Can you buy a second set of fan clips for cheap or just use like cable ties?

pez · 07-08-09

Quote:

Originally Posted by Dopamin3

I would put it if it would have any importance AT ALL. I'm not asking anything dependent on location. Also learn to resize your picture so it doesn't take up the whole freaking screen (coming from 1920 x 1080 monitor). Thank you captain irrelevant!

Back on topic: What is the best way to mount a second fan on the mugen 2? Can you buy a second set of fan clips for cheap or just use like cable ties?

Actually it was VERY relevant to the issue at hand. Also, you criticize him for not resizing his picture, yet you quoted his picture. Hypocrisy isn't a word that's just thrown around now...eh?

07-07-09	#183 (permalink)
diegolaz New to Overclock.net Join Date: Mar 2009 Location: Buenos Aires, Argentina Posts: 71 Rep: 1 Unique Rep: 1 Trader Rating: 0	Sorry if I generated any confusion. In my profile I hade country = Argentina and now I added location "Buenos Aires, Argentina" but it doesn't seem to show on left site of my posts. On topic: any new one with more pictures of the Mugen 2? More CM690 with Mugen 2 installed? Edit: Off topic, looks like location did the trick __________________ AMD Phenom II 940BE - FOXCONN A79A-S - CM 690 - Saphire 4890 1GB - 8GB OCZ Reaper Last edited by diegolaz : 07-07-09 at 07:22 AM Reason: fixed

		Overclock.net - Overclocking.net > Cooling > Air Cooling
-~=Scythe Mugen 2 Information Center and Club=~- Update 7/3/2009

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
shaolin95