computeruler

not accurate till 50c

__________________

KusH

whats not accurate til 50c?

__________________

vinzend

u using athlon right? athlon is very cool cpu.. phenom II cpus are way hotter so
it's an okay temperature.. not great..

__________________

We Are The Red Tide

hitman1985

Yeah 7750be, idk i usually go by coretemp as the highest right now in coretemp shows me 22 C and if i idle and touch the heatpipes they are colder then my fingertips. so something is way off here its the same with my backup proccy so its not the board nor the processor, anyone else have this stuff with a 7750be ?

i tested two boards :
Board 1
Gigabyte ga ma 790gp ud4h reported temps under water with 3.2 oc, max temp = 20 C

Board 2
MSI Dka 790gx Platinum reported temps under air with 3.19 oc, max temp 25 C

2 Cpu's Tested: 7750 BE and 7750 BE (one was used and one was brand spanking new)

i have screens that can go with it, so dont cry and say it isnt true.

__________________

Demonkev666

that's really strange this issue was fixed a while ago where they're showing 20C lower then normal

it was added to have a 20C+ off set on 65nm chips but for Brisbane cores

__________________
chill guy as always.

hitman1985

1st that img will be reupped in a min im putting a watermark on there...

2nd i havent seen that being done, and i have had so far 5 x 7850 and 4 x7750 be's

all have shown approx these temps, but like said if the heatsink / pipes are cold nearest reachable point to the cpu, i dont see how it can run hot

__________________

el gappo

fyi both my 7750 kuma's run a good 10-15C higher than my phenom IIx3 at the same clocks and voltages. larger die=more heat

__________________
no P.O.S.T? i made a guide for you CPU-Z validation of am3 700e
Phenom II 965 4.532ghz CPU-Z validation AIR and 4.612ghz on the bong hwbot profile
from here on in i shall be known as GAPPO THE DESTROYER

vinzend

my friend ran his kuma at 15c..
he even used xigmatek whatever which is not as good as our mugen 2!!

__________________

We Are The Red Tide

el gappo

well he is a crazy fool from the north pole lol. my kuma ran 45C idle on a ac pro 64 with 1.25V @ 3.1 and my pII runs @ 3.3 on all 3 cores with the same cooler and 1.44V at 29C. they just run cooler dont let anyone tell you different

__________________
no P.O.S.T? i made a guide for you CPU-Z validation of am3 700e
Phenom II 965 4.532ghz CPU-Z validation AIR and 4.612ghz on the bong hwbot profile
from here on in i shall be known as GAPPO THE DESTROYER

hitman1985

for the completion, heres the 30+ prime.

and here are two cpu-z validation from a cpl mins/ hrs ago:
3300...

http://valid.canardpc.com/show_oc.php?id=686602

3200...

http://valid.canardpc.com/show_oc.php?id=686698

i dont know what your doin different, but as said none of my 7x50 Be's have ever hit 30 C my ambient is about 18 - 23 C
and with none im including 2 more boards, asus 780g and gigabyte 780g based

__________________