Originally Posted by HiddenPenguin

So what kind of case is it. Where are you planning on putting the fans?

Originally Posted by kerbitroy

Slightly off topic, but it's unfortunate about your xbox's. At least you're salvaging a good use out of the working parts!

Originally Posted by SLeeZeY

Just strip the ends and ram them in a molex, if they're in the right way round they'll spin, if not, then nothing will happen..

Originally Posted by angrysasquatch

You don't want to use them. Plug it into the dead 360 with the fans outside, blowing on nothing, and as the xbox heats up it will crank up the fan speed. You should lose your sanity after about 15 minutes or so. Just don't touch the fan while it's running because if you slip you'll lose part of a fingernail at the very least.

If you really want to use it you'll have to change the connector to a 3-pin fan connector or molex, here's the pin outs for all the connectors on the 360:
http://dwl.xbox-scene.com/tutorial/X...HandC-V1_4.pdf

Originally Posted by Afrodisiac

Honestly, I would feel less stupid having a pron folder on my PC than a fake folder full of pron. "Hey, look, food recipes!" "NO NO DON'T OPEN THAT FOLDER!"

Originally Posted by SLeeZeY And no the PSU should have a probably with it unless its made of tissue paper.

Originally Posted by angrysasquatch

You don't want to use them. Plug it into the dead 360 with the fans outside, blowing on nothing, and as the xbox heats up it will crank up the fan speed. You should lose your sanity after about 15 minutes or so. Just don't touch the fan while it's running because if you slip you'll lose part of a fingernail at the very least.

If you really want to use it you'll have to change the connector to a 3-pin fan connector or molex, here's the pin outs for all the connectors on the 360:
http://dwl.xbox-scene.com/tutorial/X...HandC-V1_4.pdf

Originally Posted by kerbitroy

The perfect reply

Originally Posted by Afrodisiac

Honestly, I would feel less stupid having a pron folder on my PC than a fake folder full of pron. "Hey, look, food recipes!" "NO NO DON'T OPEN THAT FOLDER!"

Originally Posted by Shadow9025

This was a fan controller I put it to my antec where I had to modify some fans should be similar.
http://www.overclock.net/air-cooling...rollers-2.html

Originally Posted by Afrodisiac

Honestly, I would feel less stupid having a pron folder on my PC than a fake folder full of pron. "Hey, look, food recipes!" "NO NO DON'T OPEN THAT FOLDER!"

Originally Posted by videofx

He was very tall and thick. And it was a WAR! i have a strong back and i just overpowered him and mounted him and he coudlnet do nothing and it was pure action.

Originally Posted by StretchNuts

they could be mounted as exhaust fans in the top of the case fairly easy if you have a dremmel. Otherwise the only thing I can think of uses cooling wise would be to use them as ram cooler.

Originally Posted by Afrodisiac

Honestly, I would feel less stupid having a pron folder on my PC than a fake folder full of pron. "Hey, look, food recipes!" "NO NO DON'T OPEN THAT FOLDER!"

Originally Posted by TheMonster

Could I use the Xbox 360 dual fans and hook them up someone to use on my PC for a cheap way of cooling? They are the same type of fans that are in a lot of computers and I was wondering If I could hook it up to the PC. How would I go about wiring them.

I have two different ones, I have 3 xbox 360's. One RROD unfixable with any mods, One fail Disc Drive, One working. I took the connector off one so it is just 4 wires. 2 to each fan. How could I wire the fan(s) up to work when the computer is on. I am not worried about noise or anything like that.