|
![]() |
Overclock.net - Overclocking.net > Cooling > Air Cooling | |
Air cool sugestions needed
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||
|
New to Overclock.net
|
I dont have any fans in the case yet. I wondering what ones will give me the best bang for my buck and keep it cool. The system is not together yet. waiting on the pieces. also can some suggest a better temp watch program other than the asus probe?
__________________thank you
|
||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
PC Gamer
![]() |
Temp monitoring program - Motherboard Monitor http://www.majorgeeks.com/download.php?det=311
__________________
|
|||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||
|
Going Broke Overclocking
![]() |
Are the original holes 80mm?
If so before you build you could get 92mm or possibly 120mm fans. It reqiores some cutting and drilling. I upped from a 80mm in and 80mm out to 120mm in and 92mm out. The larger fans will flow more and quieter than high speed 80mm fans. If you have the tools and ability to perform the upgrade, we can give you some tips
__________________
"Life is Learning, Learning is Sharing, Sharing is Life" "Overclocking is like a drug addiction, the difference is we go broke improving our brain cells instead of destroying them!" Where in the world to buy on-line Dual or Multi Partition and Why
Everyone, GET Folding, it is important no matter how much you contribute ![]() Phenom II should be called Ph II, not a P II because it isn't an old Intel ![]()
|
||||||||||||
|
|
|
|
#4 (permalink) | ||||||||
|
New to Overclock.net
|
looks like the whole in the back is 114 mm 4.5 inches if my math is correct
__________________
|
||||||||
|
|
|
|
|
#5 (permalink) | ||||||||
|
New to Overclock.net
|
there are two stations one under the power supply and one in the botton front
__________________
|
||||||||
|
|
|
|
|
#7 (permalink) | |||||||||||||
|
FEED THE BEAST WITHIN!!!
![]() |
I'm happy with Panaflo. DO NOT GET SILENX FANS. Other then that you should be good with Thermaltake.
__________________
|
|||||||||||||
|
|
|
|
#8 (permalink) | |||||||||
|
*cough* Stock *cough*
|
Silverstones all the way... check out the CFM on these bad boys!!
__________________http://www.newegg.com/Product/Produc...82E16811999345 http://www.newegg.com/Product/Produc...82E16811999344 http://www.newegg.com/Product/Produc...82E16811999341
|
|||||||||
|
|
|
|
|
#9 (permalink) | ||||||||||||
|
audio aficionado
![]() |
I just ordered 2 of these last night
http://www.frozencpu.com/fan-106.html?id=7rvHSgy3 one of these http://www.frozencpu.com/fan-16.html these 3 fans will replace 3 of my 6 case fans. they should push the same amount of air and be quieter. the 2 80mm are going on the rear of my case to replace 2 Aspire 80mm blue led fans and the 120mm is going on the side panel to replace an aspire 120mm blue led fan. I also ordered one of these http://xoxide.com/40evbalbearf.html i'm going to use the small fan on my zalman passive heatsink on my nf4 chipset. The fans that came w/ the asus sli-deluxe are so crappy!
__________________
Please do not PM me general audio questions that should be asked on the open forum. I reserve the right to ignore your PM's. Current Sound: SA tweaked Auzen X-Fi Prelude > SA Reference IC > Musical Paradise MP-301 6v6 tube amp> Tekton Designs 4.1 single driver loudspeakers Feedback: Heatware Ebay
|
||||||||||||
|
|
|
|
#10 (permalink) | ||||||||
|
Overclocker in Training
|
alright peeps...aircooling is awesome. i might get one of those venus 12+ for my proc after taxes, along with some other stuff...but here is a question. i have tons of 80mm fans in the garage, all work great. im have a new centurion case, and wondered, how do you put fans on the ram? do i have to fabricate stuff to make this work? also, what is the going price of a decent north/south bridge cooler?
__________________
|
||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|