tipsycoma

What kind of mod is most reliable and commonly used by OCNers in order to mount an extra fan to my Mugen-2 without fan clips?

Thank you much.

Syrillian

Zip ties work well.

__________________
WIP: Scarab
Custom Cases:
Silentium, Halcyon, Indigo, Gemini, Prometheus, Anvil
Case Mods:
Liquid Chameleon, VF1000 LAN box

Semper Fidelis

tipsycoma

I don't see how that would work with a Mugen 2. There's nothing for the zip ties to go through.

Syrillian

You may have to string them together to go around the heatsink (and over to negate slippage).

If you are confident in your modding skills then some small holes could be drilled in the corners of the fins, but I'm not sure I would try that.

Another option is thick and sturdy rubber bands... not necessarily my choice as you would need decent rubber that does not wear and crack.

__________________
WIP: Scarab
Custom Cases:
Silentium, Halcyon, Indigo, Gemini, Prometheus, Anvil
Case Mods:
Liquid Chameleon, VF1000 LAN box

Semper Fidelis

tipsycoma

How about paper clips?

Raiden911

that would work too.

__________________

**The Megahalems Club**

Syrillian

As Raiden stated, that is a possibility.

But, you will want to ensure that there is some tension on the mounting technique to negate vibration of the fan against the heatsink.

You may also be able to use the protruding tips of the heatpipes in some manner.

__________________
WIP: Scarab
Custom Cases:
Silentium, Halcyon, Indigo, Gemini, Prometheus, Anvil
Case Mods:
Liquid Chameleon, VF1000 LAN box

Semper Fidelis

Raiden911

ShadowClock has a sticky with a topic in regards to fan clips --> http://www.overclock.net/air-cooling...ered-here.html

__________________

**The Megahalems Club**