|
|
|
#1 (permalink) | |||||||||||||
|
Overclocker
![]() |
last night i had a thread about a cpu cooler aorund 60$ mark, and people mentioned the mugen 2. that cost 100$ in australia. which is the same price as the high end cpu coolers. so whats the best cpu cooler out there? noctua?xigmatek?
__________________
|
|||||||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
Wannabe Photographer
![]() |
Best has to be either the Thermalright IFX-14 or Megahalems. You won't really need any of those for an E5200, I hold mine at 3.75GHz on passive mode with my TRU-90, so it really doesn't matter much what cooler you get.
__________________
|
|||||||||||||
|
|
|
|
#3 (permalink) | |||||||||||||
|
Overclocker
![]() |
yea because im running e5200 at 3ghz @ 1.36v at 80 prime :S
__________________
|
|||||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||
|
Intel Overclocker
![]() |
The best of the best is the megahalem IMO. But Noctua and Xigmatek makes some of the best coolers aswell.
Megahalem, Noctuaa nh-u12p and Xigmatek Dark Knight are very close in comparison. We're only talking about 1-2C differense with a Megahalem vs Noctua and the same goes for Xigmatek Dark Knight (Xigmatek DK has got the biggest bang for the money) vs Noctua.
__________________
OCN Terms of Service![]() We are Gr33n Macine![]() All you need to know about PhysX![]() All you need to know about SLi![]() Newbie guide to overclocking Intel processors![]() All you need to know about Intel CPU overclocking![]() Add me on Steam: '[OCN]Cyberbot' !
|
|||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||||
|
Wannabe Photographer
![]() |
You're either overvolting your processor or you have a really crappy chip, I got 3.25GHz on 1.2V and my chip is far from the best, most get 3.5GHz on 1.2V. Try lowering those voltages a bit.
__________________
|
|||||||||||||
|
|
|
|
#6 (permalink) | |||||||||||||
|
Overclocker
![]() |
i cant lol, it wont let me, pc restarts after i lower voltage then goes to normal freq.
__________________
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|