|
![]() |
Overclock.net - Overclocking.net > AMD > AMD Motherboards > AMD BIOS | |
Help Please BIOS failure
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||
|
New to Overclock.net
|
hi im in need off some help ive just overclocked the multiplyer to x16 the mobo is at 200mhz , windows never booted up so i restarted and tried to go into bios to change it back but bios wont load properly just the top menus appear but nothing else and i cant do anything it just freezes ive restarted an tried again but no luck any one got any help or ideas please?
__________________
|
|||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||
|
Folding Fanatic
![]() |
Reset the cmos...Pull the battery out of couple minutes and put it back in and fire her up...
__________________
It's easier to beg for forgiveness then to ask for permission...Just ask my wife... ![]()
|
||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||
|
Overclocker
![]() |
Did you reset your cmos yet ?
Pull your battery out for 20 seconds then replace it. Boot up. Enter Bios
|
||||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||
|
New to Overclock.net
|
thank god for that yeh done it and its worked thanks alot!!!!! i thought i had fried the cpu!
__________________
|
|||||||||||
|
|
|
|
|
#5 (permalink) | ||||||||||||||
|
Security Sleuth
![]() |
u can't fired a chip that easy.
__________________
http://valid.canardpc.com/show_oc.php?id=611561 ![]() Core i7 ![]() http://valid.canardpc.com/show_oc.php?id=707087 Quote:
|
||||||||||||||
|
|
|
|
|
#6 (permalink) | ||||||||||||
|
PC Gamer
![]() |
Quote:
For your 5000+ Black on the M2N32-SLI Deluxe Your probably gonna have to raise the Vcore CPU Multi - 16 Vcore - 1.375V - 1.425V Set the ram to the recommended Specs of the Manufacturer (EXAMPLE : 4-4-4-12-2T @2.2V) yours will be different Some where in there you should be able to use the X16 Multi for 3.2ghz ![]() Also to reset the CMOS on that board Turn the power off...Pull the Power chord off....Take out the Battery....Move the Jumper to pins 2-3...wait 7-10 seconds....Move Jumper back to pins 1-2.....Put the battery back in....Plug the power chord back in....turn power on PSU....Start computer ![]() I have the M2N32-SLI deluxe and the 5000+ Black edition http://valid.x86-secret.com/show_oc.php?id=450747
__________________
GFWL tag = XxBeNigNxX Steam Tag = XxBeNigNxX
Last edited by XxBeNigNxX : 12-13-08 at 10:52 PM |
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|