|
|
|
 |
Overclock.net - Overclocking.net > AMD > AMD Motherboards > AMD BIOS | |
M3A79-T New BIOS
|
||
 |
|
|
LinkBack | Thread Tools |
02-06-09
|
#1 (permalink) | ||||||||||
|
AMD Overclocker
 
|
M3A79-T New BIOS
[ 0703 ]
ftp://ftp.asus.com.tw/pub/ASUS/mb/so...3A79-T_Deluxe/ ---------------------- 01. Support ACC with AM2+ 45nm CPU. 02. Improve the system performance when use certain CPU. 03. Fixed System may show Boot fail message if ACC enabled. 04. Fix the problem that AM2 CPU Vcore voltage may be incorrect if change CPU voltage in AI Suite. 05. Fix the problem that AI_NAP may not work after resuming from S1 or S3. 06. Set the value of "Processor Frequency Multiplier" option in bios up to 35 for certain CPU. 07. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx (ACC is a overclock technique which can adjust the voltage and frequency for AMD CPU directly under OS)
__________________
 PHENOM II X2 550BE OC CLUBi7 860 @4.2 http://valid.canardpc.com/show_oc.php?id=1016694 Phenom II 550 X4 @4.160(MA790X-UD4P) http://valid.canardpc.com/show_oc.php?id=652117 Phenom II 550 X2 @ 4.1(MA790X-UD4P) http://valid.canardpc.com/show_oc.php?id=638438 Kuma 7750 @ 3.5....http://valid.canardpc.com/show_oc.php?id=560031 Phenom II 940 @4.1<------http://valid.canardpc.com/show_oc.php?id=501007 9850BE@3.6------- http://valid.x86-secret.com/show_oc.php?id=447465
Last edited by HondaGuy : 02-06-09 at 09:28 AM |
||||||||||
|
|
|
03-10-09
|
#2 (permalink) | ||||||||||||
|
New to Overclock.net
|
I have flashed the new BIOS(703). However I noticed that my idle temperature is around 49-51C (60C load). Previously I had the factory version of bios (302 I believe?) and the temperature on the CPU was around 40C in idle.
__________________Also I have noticed, when I start my computer, that my GPU fan goes for an extra couple of seconds under fully load (100%) and then it goes back to normal (40%). One more thing... what is CPU Fetching option for? It is in the BIOS an it is set to enabled.I haven't changed it yet. Any thoughts on this?
Last edited by vocoder : 03-10-09 at 01:26 PM |
||||||||||||
|
|
|
|
03-10-09
|
#3 (permalink) | ||||||||||||
|
New to Overclock.net
|
UPDATE: CPU Tweak was Enabled...and that was apparently giving me an extra 10 C on CPU.
__________________
|
||||||||||||
|
|
|
|
03-21-09
|
#4 (permalink) | ||||||||||||
|
ATI Enthusiast
|
Disable CPU Tweak and Auto XPress, this should lower your temps 5-8*C at least. Ive been running like this for about 3 weeks, and there is a noticable difference in temps, as well as stable 3.2ghz on my 9950.
__________________
|
||||||||||||
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
