|
|
|
 |
Overclock.net - Overclocking.net > AMD > AMD Motherboards > AMD BIOS | |
NEW ISSUE!!! (last post)
|
||
 |
|
|
LinkBack | Thread Tools |
08-01-09
|
#31 (permalink) | |||||||||
|
AMD Overclocker
|
found it, but there are only 2 pins on the "clear cmos" spot and it's also next to the battery...there is no "jumper" for it... OMG!@
__________________Should I use one of the front panel connectors instead?
Last edited by godsgift2dagame : 08-01-09 at 02:59 AM |
|||||||||
|
|
|
08-01-09
|
#32 (permalink) | |||||||||
|
AMD Overclocker
|
Halifax, got any more ideas? I don't have the jumper...maybe my front panel idea?
__________________
|
|||||||||
|
|
|
|
08-01-09
|
#33 (permalink) | |||||||||||||
|
New 4890 Owner!
 
|
I don't know what you mean by using your FP.
I guess you could plug in one of them to act like a jumper which should work just fine, just don't boot it up with it plugged in there. I would just remove the battery since that clears it as well. You can clear the CMOS by using a screwdriver to the two CLR_CMOS pins for a few seconds by touching both of them.
__________________
Useful Links for Overclock.net Members
[Overclock.net Terms of Service] [Overclock.net Professionalism Initiative] [Software Piracy Discussions Forbidden] Left 4 Dead 2 Discussion, Screenshots, and Benchmarks Thread My Left 4 Dead 2 Demo PC Gameplay Steam ID: Halifax1
|
|||||||||||||
|
|
|
08-01-09
|
#34 (permalink) | |||||||||
|
AMD Overclocker
|
Then try to turn on pc again?
__________________
|
|||||||||
|
|
|
|
08-01-09
|
#35 (permalink) | |||||||||
|
AMD Overclocker
|
What do I use to remove battery? Flathead ain't working...I will end up breaking placeholder...
__________________
|
|||||||||
|
|
|
|
08-01-09
|
#36 (permalink) | |||||||||
|
AMD Overclocker
|
It's alive again, but back to the devices listing screen showing up forever!!! any idea what next?
__________________EDIT: halifax, thank you sooooooooooo f'ing much for your help so far!
|
|||||||||
|
|
|
|
08-01-09
|
#37 (permalink) | |||||||||
|
AMD Overclocker
|
I haven't slept more than 5 hours...I can't, too worried...anyone else got any ideas?
__________________
|
|||||||||
|
|
|
|
08-01-09
|
#38 (permalink) | |||||||||
|
AMD Overclocker
|
Tried loading optimized settings, no luck. Tried loading fail-safe, no luck..
__________________
|
|||||||||
|
|
|
|
08-01-09
|
#39 (permalink) | |||||||||
|
AMD Overclocker
|
I should have been more clear...it's hanging at the part "Verifying DMI Pool Data". I'm beginning to get worried about my PSU as I keep turning on/off and resetting! Someone please help!
__________________
|
|||||||||
|
|
|
|
08-01-09
|
#40 (permalink) | ||||||||||||||
|
4.0ghz
 
|
You dont need a jumper to short the CLR CMOS pins, just ground the pins by touching them both with the tip of a screwdriver.
As for your error, it is probably due to flashing with OCed settings. After clearing the bios, remove all but one stick of ram, and see if you can boot. And keep im mind that your board has a dual bios, so it is pretty hard to brick the board. Motherboard product page: Quote:
__________________
Quote:
Last edited by ericeod : 08-01-09 at 12:35 PM |
||||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
